erdEducation Reform and Development2652-53642652-5372Bio-Byword Scientific Publishing Pty. Ltd.10.26689/erd.v8i2.14173ArticlePerformance and Mechanism Innovation of Zinc Oxide Desulfurizershttps://artdesignp.com/journal/erd/8/2/10.26689/erd.v8i2.14173GaoYue,QiXuan,YangXiuli2026822026-03-11A series of nano-ZnO desulfurizers were prepared by the homogeneous precipitation-gradient calcination method. The synergistic optimization of particle size (10–50 nm) and oxygen vacancy concentration was achieved by regulating the calcination temperature. The material structure was systematically characterized by XRD, TEM, XPS, MS-H₂S-TPSR and other techniques, and its desulfurization performance for H₂S at room temperature was investigated. The results showed that the nano-ZnO prepared by calcination at 350℃ (particle size 22 nm) had the highest oxygen vacancy density, with a room-temperature sulfur capacity of 18.5%, which was about 4 times higher than that of traditional micro-ZnO. Mechanism studies indicated that oxygen vacancies could adsorb and activate O₂, oxidizing H₂S into polysulfide intermediates (ZnSₓ), which were ultimately converted into easily regenerable elemental sulfur instead of directly forming ZnS. After 5 cycles of use, the sulfur capacity of the desulfurizer remained 15.2%, showing good stability and regeneration performance, which provided new materials and a theoretical basis for low-temperature efficient desulfurization.

Hao JM, Ma GD, 2019, Air Pollution Control Engineering. Higher Education Press, 2019: 215–220.

Li X, Wang Y, Zhang L, 2020, ZnO-Based Sorbents for H₂S Removal: A Review. Journal of Hazardous Materials, 386: 121785.

Zhang Y, Li J, Chen S, 2018, Nanostructured ZnO for Gas Sensing and Desulfurization Applications. Materials Science & Engineering B, 234: 112–120.

Kim JH, Park JG, Lee JH, 2017, Au-Loaded ZnO Nanoparticles for Room-Temperature H₂S Sensing and Removal. Sensors and Actuators B: Chemical, 244: 853–861.

Liu H, Chen M, Zhao L, 2021, Preparation and Room-Temperature Desulfurization Performance of Cu-Doped ZnO Nanosheets. Chinese Journal of Inorganic Chemistry, 37(6): 1056–1064.

Yang D, Chen X, Li G, 2022, Oxygen Vacancy Engineering in Metal Oxides for Environmental Applications. Environmental Science & Technology, 56(1): 42–62.

Zhang X, Li J, Liu W, 2019, Influence of Temperature and Humidity on the Performance of ZnO-Based Materials for H₂S Removal. Environmental Science & Technology, 53(14): 8585–8592.

Zhao X, Song Z, Wang L, 2021, A Review on the Development of ZnO-Based Adsorbents for H₂S Removal in Industrial Applications. Journal of Hazardous Materials, 412: 125189.

Zhang X, Li Y, Wang M, 2021, ZnO/Graphene Composites for H₂S Removal at Room Temperature. Journal of Environmental Management, 295: 113033.

Zhou Z, Yang Y, Wu Y, 2020, ZnO-Based Composite Materials for High-Efficiency H₂S Adsorption and Removal. Journal of Alloys and Compounds, 822: 153728.

Kim T, Lee S, Park J, 2019, Enhanced H₂S Sensing and Removal by TiO₂/ZnO Composite Nanostructures. Sensors and Actuators B: Chemical, 288: 321–329.

Chen Z, Liu X, Wang P, 2020, Synthesis of Porous ZnO Nanoparticles for Efficient H₂S Adsorption at Ambient Temperature. Journal of Materials Science, 55(14): 5824–5834.

Liu H, Zhang M, Wei X, 2021, ZnO-Based Nanomaterials for H₂S Sensing and Removal: A Review. Environmental Science and Pollution Research, 28(1): 1124–1141.

Yang Y, Zhang Y, Gao P, 2022, H₂S Gas Removal by ZnO-Based Catalysts: Mechanisms and Applications. Journal of Catalysis, 406: 292–303.

Hu X, Wu S, Zhang Q, 2020, The Effect of Surface Modifications on ZnO for H₂S Sensing and Removal. Journal of Colloid and Interface Science, 577: 298–306.