JERAJournal of Electronic Research and Application2208-35022208-3510Bio-Byword Scientific Publishing Pty. Ltd.10.26689/jera.v10i3.14645ArticleAnalysis of Fracture Failure of Connecting Bolts for Diaphragm Pump Valve Box Coverhttps://artdesignp.com/journal/JERA/10/3/10.26689/jera.v10i3.14645QiXuan,GaoYue20261032026-04-22Aiming to address the repeated fracture of connecting bolts in the feed valve box cover of a large Type A diaphragm pump, a three-dimensional model of the valve box assembly was first established. Subsequently, bolt strength was evaluated using three finite element analysis methods: axisymmetric analysis, cyclic symmetry analysis, and full 3D integral analysis. It was clarified that the first few threads bear the maximum stress, which is consistent with the actual fracture position. Combined with the analysis results, it is concluded that the main causes of bolt fracture are alternating load bearing, low safety margin of specifications, and the coarse thread design also affects its load-bearing capacity.

Editorial Board of Mechanical Design Handbook, 2020, Mechanical Design Handbook: Volume 2 Fasteners, 6th Edition, China Machine Press, Beijing.

State Bureau of Technical Supervision, 1988, GB/T899-1988 Double-Ended Studs bm=1.5d, China Standard Press, Beijing.

State Bureau of Technical Supervision, 1981, GB/T196-1981 Basic Dimensions of General Purpose Metric Screw Threads, China Standard Press, Beijing.

Wang X, Shao M, 2003, Basic Principles and Numerical Methods of Finite Element Method, 2nd Edition, Tsinghua University Press, Beijing.

Liu H, 2017, Mechanics of Materials (Ⅰ), 6th Edition, Higher Education Press, Beijing.

Gou W, Jin B, Wei F, 2008, Mechanical Fatigue and Fracture, Northwestern Polytechnical University Press, Xi’an.

Zhang F, 2014, Design and Application of Threaded Connections, China Machine Press, Beijing.

Wang G, 2008, Practical Engineering Numerical Simulation Technology and Its Application in ANSYS, 2nd Edition, Northwestern Polytechnical University Press, Xi’an.

Editorial Board of Mechanical Engineering Materials Handbook, 2019, Mechanical Engineering Materials Handbook: Metal Materials Volume, 5th Edition, Chemical Industry Press, Beijing.

Zheng J, Dong Q, Sang Z, 2015, Process Equipment Design, 4th Edition, Chemical Industry Press, Beijing.

Yu W, Gao B, 2017, Application of ANSYS in Mechanical and Chemical Equipment, 3rd Edition, China Water & Power Press, Beijing.

He X, 2011, Mechanical Connection Technology, China Machine Press, Beijing.

National Technical Committee for Pump Standardization, 2021, JB/T6900-2021 Diaphragm Pumps, China Machine Press, Beijing.

Cheng D, 2017, Handbook of Taboos in Mechanical Design, 2nd Edition, Chemical Industry Press, Beijing.

Li H, 2011, Hydraulic Components and Systems, National Defense Industry Press, Beijing.