JERAJournal of Electronic Research and Application2208-35022208-3510Bio-Byword Scientific Publishing Pty. Ltd.10.26689/jera.v10i7.15840ArticleA Study on the Enhancement of PM2.5 Air Purification Capability in Cyclone Separators with Curved Structures Based on CFD Simulationhttps://artdesignp.com/journal/JERA/10/7/10.26689/jera.v10i7.15840QiuYitong20261072026-08-11Driven by the demand for purifying indoor air from particulate matter, this study has carried out systematic numerical research on the effect of cyclone separator geometry on the performance of PM2.5 filtration. A comprehensive CFD analysis system is constructed based on three cone segments generatrices: straight, concave, and convex. The continuous phase in the simulation adopts the Reynolds Stress Model (RSM) due to its high ability to predict the strong anisotropic turbulent flow inside the cyclone separator. The particle phase in the present study is simulated through the Discrete Phase Model (DPM) by the Lagrangian method and considers the effects of drag force, centrifugal force, and turbulence diffusion to predict the migration and deposition process of particles with various diameters. From the results, the convex generatrix shows great superiority in capturing fine particles, obtaining a high efficiency of PM2.5 separation up to 82.4% and a small cut-off diameter down to 2.1 μm. In comparison, the concave generatrix outperforms in reducing the pressure drop and optimizing the energy efficiency ratio, while the straight generatrix ranks in between. The results show that the reasonable control of geometric curvature can significantly improve the flow field stability and particle distribution characteristics.

Jiang L, Liu Y, Wang C, et al., 2025, A Numerical Simulation Study on the Separation Efficiency of a Symmetrical Double-Cyclone Separator. Combined Machine Tools and Automated Machining Technology, 2025(6): 31–35.

Zhang H, Guo H, He X, et al., 2025, Simulation Study on Dust Capture Characteristics in Microcyclone Structure Based on CFD-DPM. Chinese Journal of Work Safety Science and Technology, 21(3): 113–118.

Wu J, Lin J, 2024, Simulation Analysis of Mud and Sand Separation Performance of Hydrocyclone Based on Fluent. Journal of Physics: Conference Series, 2820: 012101.

Yang S, Wu K, Li R, et al., 2025, Analysis and Optimization of Industrial Dust Removal Components Based on CFD-DPM and PIV. Journal of Xihua University (Natural Science Edition), 45(X): 1–11.

Fu P, Wang F, Ma L, et al., 2016, Fine Particle Sorting and Classification in the Cyclonic Centrifugal Field. Separation and Purification Technology, 158: 357–366.

Zhang L, Zhang G, Yang Q, et al., 2018, A Study on the Diffusion of PM2.5 in Urban Streets Based on CFD Simulation. Environmental Horizons, 2018(3): 66–70.

Wang Z, Zhang Z, Jiao Q, et al., 2024, Based on the Analysis of the Factors Influencing the Collection Rate of the Dust Removal Device by Fluent. Machine Design and Research, 40(5): 75–82.

Li Q, Li L, Tang G, et al., 2025, A Study on the Influence of Velocity and Particle Size on the Filtration Efficiency of Cyclone Dust Collectors. Safety and Production, 7: 84–88.

Chen Y, 2021, Application of New Type Cyclone Dust Collector in Dust Removal of Exhaust Gas of 1 Mt/a Ethylene Production Plant. Chemical Industry and Environmental Protection, 41(2): 241–245.

Xu J, Zhang L, Yue R, et al., 2015, CFD Simulation on the Aggregation of PM2.5 Fine Particles. Computers and Applied Chemistry, 32(6): 713–720.