JERAJournal of Electronic Research and Application2208-35022208-3510Bio-Byword Scientific Publishing Pty. Ltd.10.26689/jera.v8i2.6393ArticleDesigning an Experimental Device for Swinging Excitation Spray Coolinghttps://artdesignp.com/journal/JERA/8/2/10.26689/jera.v8i2.6393HuangLong,WangYujiao2024822024-03-30In this paper, we introduce the design principle of the oscillating excited spray cooling experimental device. We then designed an oscillating excited spray cooling experimental device. By using the device, the swaying motion can be realized through the control system, and the motion of the droplet under different vibration frequencies can be observed. By measuring the liquid flow rate and pressure, the changes in liquid flow rate, pressure, and temperature with time under different vibration frequencies were studied. The trajectory of the droplet and the temperature distribution of the droplet under different vibration frequencies could be observed. The device has a simple structure, is easy to control, and can achieve continuous observation of the spray cooling process.

Liu S, Ruan L, Kang Y, 2018, Experimental Research and Numerical Analysis of Atomization Characteristics at Spray Cooling Axis. Science Technology and Engineering, 18(24): 225–229.

Zhou N, Feng H, Xu H, et al. 2021, Experimental Study on Heat Transfer Performance of R134a Closed Spray Cooling. Journal of Refrigeration, 42(03): 152–158.

Chen Z, Cheng Y, Tan H, et al., 2019, Spray Cooling Performance of Spray Rotary Cooler. Iron and Steel, 55(05): 116–123.

Li L, Liu N, Huang Q, 2015, Research Progress of Inclined Spray Cooling. Refrigeration Technology, 35(04): 52–56 + 60.

Wang G, Wang C, Jiang P, et al., 2020, Experimental Study on Low-Pressure Flash Spray Cooling of R134a. Chinese Journal of Engineering Thermophysics, 41(10): 2549–2553.

Liu R, Zhang L, Zhang X, 2018, Application of Spray Cooling Technology in Aerospace Field. Vacuum and

Cryogenics, 24(05): 353–357.

Wang R, Chen B, Wang J, et al., 2018, Experimental Study on Transient Spray Cooling and Superheat Effect of R1234yf. Acta Chemologica Sinica, 69(02): 595–601.

Zhang L, Zhong J, Jiang S, et al., 2018, Design and Research of Spray Cooled Cold Plate. Electronic Mechanical Engineering, 34(01): 23–27. (in Chinese)

Liu S, Ruan L, Li Z, 2018, Research on Influencing Factors of Atomization Characteristics in Spray Cooling System. Cryogenic Engineering, 224(04): 68–74.

Zhou N, Wang Y, Jiang Y, et al., 2016, Experimental Correlation Study of Airborne Spray Cooling Without Boiling Zone. Journal of Aerospace Power, 31(05): 1113–1120.

Wang W, Ren K, Niu J, et al., 2022, Numerical Study on Cooling Characteristics of Dry Ice Spray with Array Nozzle. Cryogenics and Superconductivity, 50(04): 58–64 + 94.

Huang L, Wang S, Wang Y, et al., 2019, Experimental Study on Critical Heat Transfer Characteristics of Spray Cooling. Refrigeration and Air Conditioning, 20(03): 54–59.

Miao Y, 2019, Development of Spray Cooling Experimental Device and Study on Cooling Characteristics of Porous Foam, dissertation, Harbin Institute of Technology.

Du K, 2020, Experimental Research on Pulse Spray Cooling Under Low Pressure, dissertation, Nanjing University of Aeronautics and Astronautics.

Liang Y, Liu N, 2017, Experimental Research Progress of Pulsed Spray Cooling. Electronic Components and Materials, 36(04): 21–26.

Zou T, 2021, Experimental research on the Cooling of Liquid Nitrogen Spray Heat Transfer, dissertation, Harbin Institute of Technology.

Xue R, Ruan Y, Lai H, et al., 2019, Numerical Simulation of Liquid Nitrogen Spray Cooling in Large Space in Low-Temperature Wind Tunnel. Cryogenic Engineering, 227(01): 35–40.

Zhu T, Liu N, Liang Y, et al., 2019, Effect of Dip Angle and Surfactant on Properties of Pulsed Spray Cooling. Chemical Engineering, 49(11): 31–36.

Xin H, Chen B, Zhou Z, 2020, Experimental Study on Influence of Parameters of Heat Transfer Characteristics of Pulsed Spray Cooling. Chinese Journal of Engineering Thermophysics, 41(09): 2220–2224.

Yang C, Zhang H, Liu J, 2019, Experimental Study on Uniformity of Spray Cooling with Open Single Nozzle. High Power Laser and Particle Beams, 32(07): 23–28.