JWAJournal of World Architecture2208-34802208-3499Bio-Byword Scientific Publishing Pty. Ltd.10.26689/jwa.v9i4.11810ArticleExperimental Design and Material Properties Research of the Reinforced UHPC Columnshttps://artdesignp.com/journal/JWA/9/4/10.26689/jwa.v9i4.11810DuanJiaqi,FuQiaoling2025942025-09-04Medium shear span ratio reinforced columns are prone to complex failure under seismic action. This paper compares the seismic performance of normal concrete columns and UHPC columns by introducing ultra-high-performance concrete (UHPC). The shear span ratio (2.4-4.4) and axial compression ratio (0.10, 0.36) were used as variables, and the bearing capacity, ductility and failure mode were analyzed through low-cycle reciprocating loading studys. The results showed that UHPC significantly improved the bearing capacity, stiffness and energy dissipation capacity of the column, and suppressed the crushing and spalling of concrete. When the shear span ratio is 2.4 and the axial compression ratio is 0.36, the failure mode of UHPC columns was changed from shear failure to flexural shear failure. Thus this study can become a reference for the seismic design of UHPC columns.

Li V, Wang S, 2003, Flexural Behavior of Reinforced Engineered Cementitious Composite (ECC) Beams. ACI Structural Journal, 100(6): 712–720.

Zhou M, Lu W, Song J, et al., 2018, Application of Ultra-High-Performance Concrete in Bridge Engineering. Construction Building Materials, 186(10): 1256–1267.

Association Francaise de Genie Civil (AFGC), Service d'Etudes Techniques des Routes et Autoroutes (SETRA), 2002, Ultra High-Performance Fibre-Reinforced Concrete-Interim Recommendations. Bulletin des Laboratoires des Ponts et Chaussées, (239): 1-152.

Ministry of Housing and Urban-Rural Development of the People's Republic of China (MOHURD), 2020, Code for Seismic Testing of Buildings. China Architecture & Building Press, Beijing.

Russo G, Pauletta M, Damiani L, 2015, Experimental and Numerical Analysis of Ultra-High Performance Fiber Reinforced Concrete (UHPFRC) Columns under Cyclic Loading. Engineering Structures, 100: 422–435.

Wu Z, Shi C, He W, et al., 2016, Mechanical Properties of Ultra-High Performance Concrete Containing Steel Fibers. Construction and Building Materials, 121, 74–83.

Ferrara L, Park Y, Shah P, 2007, A Method for Mix-Design of Fiber-Reinforced Self-Compacting Concrete. Cement and Concrete Research, 37(6), 957–971.

Ministry of Housing and Urban-Rural Development of the People's Republic of China (MOHURD), 2021, Standard Study Methods for Properties of Ordinary Concrete Mixtures. China Architecture & Building Press, Beijing

Graybeal A, 2006, Material Property Characterization of Ultra-High Performance Concrete. FHWA-HRT-06-103, Federal Highway Administration, U.S. Department of Transportation.

Ministry of Housing and Urban-Rural Development of the People's Republic of China (MOHURD), 2022, Standard Study Methods for Physical and Mechanical Properties of Concrete. China Architecture & Building Press, Beijing.

China Concrete and Cement-based Products Association (CCPA), China Building Materials Federation (CBMF), 2023, Basic Properties and Study Methods of Ultra-High Performance Concrete. China Building Materials Industry Press, Beijing.

Habel K, Gauvreau P, 2002, Response of Ultra-High Performance Fibre Reinforced Concretes (UHPFRC) under Impact and Static Loading. Cement and Concrete Composites, 30(10), 938–946.

Yoo D, Banthia N, Yoon Y, 2015, Flexural Response of Ultra-High-Performance Fiber-Reinforced Concrete Beams Reinforced with GFRP and Steel Bars. Construction and Building Materials, 93, 802–815.

State Administration for Market Regulation (SAMR), Standardization Administration of China (SAC), 2021, Metallic Materials - Tensile Testing - Part 1: Study Method at Room Temperature. China Standards Press, Beijing.

Wang F, Liu H, Wang C, 2020, Effect of Age on Mechanical Properties of Steel Sleeve Grouting Connection. Journal of Shandong University of Technology (Natural Science Edition), 34(6): 74–78.