SSRScientific and Social Research2661-43322981-9946Bio-Byword Scientific Publishing Pty. Ltd.10.26689/ssr.v6i7.6416ArticleFlexible Cellulose Nanofiber (CNF)-Nano- Montmorillonite (MMT) Composite Sheet Structure and Water Vapor Barrier Performancehttps://artdesignp.com/journal/SSR/6/7/10.26689/ssr.v6i7.6416ShanmugamKirubanandan2024672024-07-26One of the newly developed nanomaterials for functioning as high-performance packaging materials to replace synthetic plastics such as low-density and high-density polyethylene (LDPE, HDPE) is cellulose nanofiber (CNF). These substances are biodegradable, recyclable, and renewable. While cellulose nanofiber-based films have substantially better water vapor permeability than traditional packaging polymers, they have extremely low oxygen permeability. Water vapor permeability (WVP) of the spray-coated composites was decreased via spraying nano-montmorillonite (MMT) content into CNF suspension and also high-pressure homogenization of CNF-MMT suspension. The process for spraying cellulose nanofiber (CNF)-nano-montmorillonite (MMT) suspension on the stainless-steel surface was developed to produce a high-barrier performance composite. The two types of composites were prepared via spraying of raw CNF with MMT and fibrillated CNF with MMT via high-pressure homogenization. The structure and barrier performance of these composites were investigated with SAXS and ASTM E96/E96M-05. Before homogenization, the MMT is agglomerated, while after homogenization it is more exfoliated, which is split up into individual sheets. The water vapor permeability could be reduced by adding up to 20 wt. % montmorillonite and dispersing montmorillonite with two passes in a high-pressure homogenizer. With montmorillonite addition above 20 wt. %, the water vapor permeability started to increase due to aggregation of the montmorillonite in the homogenized composite. At the optimal addition level, the best performance achieved with spraying was a water vapor permeability of 8.3 x 10-12 g/m.s.pa. The air permeability of the composite was evaluated to be less than 0.003 µm/Pa.s. This value confirms an impermeable composite for packaging applications. Considering the orientation of MMT in the composite, the composite’s structure can decide the barrier performance and can be altered by further fibrillation process of cellulose nanofibers via high-pressure homogenization.

Silvestre C, Duraccio D, Cimmino S, 2011, Food Packaging based on Polymer Nanomaterials. Progress in Polymer Science, 36(12): 1766–1782. https://doi.org/10.1016/j.progpolymsci.2011.02.003

Berk Z, 2013, Chapter 27: Food Packaging, in Food Process Engineering and Technology (Second Edition). Academic Press, San Diego, 621¬–636.

Varanasi S, Batchelor WJ, 2013, Rapid Preparation of Cellulose Nanofiber Sheet. Cellulose, 20(1): 211–215.

Beneventi D, Chaussy D, Curtil D, et al., 2014, Pilot-scale Elaboration of Graphite/Microfibrillated Cellulose Anodes for Li-ion Batteries by Spray Deposition on a Forming Paper Sheet. Chemical Engineering Journal, 2014(243): 372–379. https://doi.org/10.1016/j.cej.2013.12.034

Shanmugam K, Doosthosseini H, Varanasi S, et al., 2018, Flexible Spray Coating Process for Smooth Nanocellulose Film Production. Cellulose, 2018(25): 1725–1741. https://doi.org/10.1007/s10570-018-1677-7

Shanmugam K, Varanasi S, Garnier G, et al., 2017, Rapid Preparation of Smooth Nanocellulose Films using Spray Coating. Cellulose, 2017(24): 2669–2676. https://doi.org/10.1007/s10570-017-1328-4

Kontturi E, Laaksonen P, Linder MB, et al., 2018, Advanced Materials through Assembly of Nanocelluloses. Advanced Materials, 30(24): 1703779.

Beneventi D, Zeno E, Chaussy D, 2015, Rapid Nanopaper Production by Spray Deposition of Concentrated Microfibrillated Cellulose Slurries. Industrial Crops and Products, 2015(72): 200–205.

Krol LF, Beneventi D, Alloin F, 2015, Microfibrillated Cellulose-SiO2 Composite Nanopapers Produced by Spray Deposition. Journal of Materials Science, 50(11): 4095–4103. https://doi.org/10.1007/s10853-015-8965-5

Nair SS, Zhu J, Deng Y, et al., 2014, High Performance Green Barriers based on Nanocellulose. Sustainable Chemical Processes, 2(1): 23. https://doi.org/10.1186/s40508-014-0023-0

Garusinghe UM, Varanasi S, Raghuwanshi VS, et al., 2018, Nanocellulose-montmorillonite Composites of Low Water Vapor Permeability. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2018(540): 233–241. https://doi.org/10.1016/j.colsurfa.2018.01.010

Liu A, Walther A, Ikkala O, et al., 2011, Clay Nanopaper with Tough Cellulose Nanofiber Matrix for Fire Retardancy and Gas Barrier Functions. Biomacromolecules, 12(3): 633–641. https://doi.org/10.1021/bm101296z

Pandey JK, Lee S, Kim HJ, et al., 2012, Preparation and Properties of Cellulose-based Nanocomposites of Clay and Polypropylene. Journal of Applied Polymer Science, 125(S1): E651–E660.

Uyama H, Kuwabara M, Tsujimoto T, et al., 2003, Green Nanocomposites from Renewable Resources: Plant Oil-Clay Hybrid Materials. Chemistry of Materials, 15(13): 2492–2494. https://doi.org/10.1021/cm0340227

Raj P, Mayahi A, Lahtinen P, et al., 2016, Gel Point as a Measure of Cellulose Nanofiber Quality and Feedstock Development with Mechanical Energy. Cellulose, 23(5): 3051–3064. https://doi.org/10.1007/s10570-016-1039-2

Ward WJ, Gaines GL, Alger MM, et al., 1991, Gas Barrier Improvement using Vermiculite and Mica in Polymer Films. Journal of Membrane Science, 55(1): 173–180. https://doi.org/10.1016/S0376-7388(00)82333-9

Kalia S, Dufresne A, Cherian BM, et al., 2011, Cellulose-Based Bio- and Nanocomposites: A Review. International Journal of Polymer Science, 2011(837875): 35. https://doi.org/10.1155/2011/837875

Alexandre B, Langevin D, Médéric P, et al., 2009, Water Barrier Properties of Polyamide 12/montmorillonite Nanocomposite Membranes: Structure and Volume Fraction Effects. Journal of Membrane Science, 328(1): 186–204. https://doi.org/10.1016/j.memsci.2008.12.004

Shailesh S, Xiaoming C, Michael P, et al., 2015, Effect of Interfacial Pretreatment on the Properties of Montmorillonite/poly(vinyl alcohol) Nanocomposites. Journal of Applied Polymer Science, 132(18): 41867. https://doi.org/10.1002/app.41867

Furukawa Y, Watkins JL, Kim J, et al., 2009, Aggregation of Montmorillonite and Organic Matter in Aqueous Media Containing Artificial Seawater. Geochemical Transactions, 2009(10): 2. https://doi.org/10.1186/1467-4866-10-2